Futaba CIU-2 Manuel d'utilisateur télécharger pdf

USB INTERFACE

Instruction Manual

USB port

Thank you for purchasing a CIU-2.

The CIU-2 is a USB interface for communications between Link supported devices and a Windows

computer.

Connecting and disconnecting the PC and CIU-2

1M23N19202

*Windows is registered trademark of Microsoft Corporation.

Notes

sPlease read this manual thoroughly before using your CIU-2.

sStore this manual in a safe place where it can be accessed at any time.

Drivers and Link programs must be installed.

sTo use the CIU-2, drivers must be installed.

sFor communication and setting, Link programs corresponding to each device must be installed.

Install the drivers and Link programs available on the dealer’s website.

Connection

1.Turn on the PC power.

2.Connect the CIU-2 to the USB port of the PC.

3.When the CIU-2 is first connected to the PC;

the “Found New Hardware Wizard” shown at

the right is displayed. Install the drivers

downloaded from the dealer’ s website.

Disconnection

The CIU-2 can be disconnected even while the

PC power is on. However, do not disconnect

the CIU-2 while it is communicating with a Link

supported device.

sReproduction of all, or part, of the contents of this manual without prior written permission is

prohibited.

sThe contents of this manual are subject to change without prior notice.

sThe contents of this manual should be complete, but if you find any errors or unclear points, please

sFutaba will not be responsible for the results of use of devices by the customer.

Specifications

(Specifications and ratings are subject to change without prior notice accompanying technological developments.)

sInterface : USB Rev1.1 compliant

sUSB connector : USB Series A connector

sOperating voltage : 5.0V ±0.2V (USB bus power)

sCurrent drain

(At connection, idle): 12.3 ±2.0mA

*The PC must have a USB port (Type A).

sOperating environment:

Temperature -10 ~ 50degrees Celsius

sDimensions : 18.2 X 56.5 X 9.0 mm

sWeight : 7.5g

sApplicable OS : Windows Vista/XP/2000

*A 500mm extension

cord is supplied with

the CIU-2.

1 2

Résumé du contenu

Page 1 - Instruction Manual

USB INTERFACEInstruction ManualUSB portThank you for purchasing a CIU-2.The CIU-2 is a USB interface for communications between Link supported devices

Page 2 - Usage Precautions

Connection method1.Connect the CIU-2 to the USB port of the PC.2.Connect the Link supported device to the CIU-2.3.Connect the batteries by referring t

Commentaires sur ces manuels

Pas de commentaire

Futaba CIU-2 Manuel d'utilisateur

Naviguer en ligne ou télécharger Manuel d'utilisateur pour Matériel Futaba CIU-2. Futaba CIU-2 User Manual Manuel d'utilisatio

Résumé du contenu

Commentaires sur ces manuels

Produits connexes et manuels pour Matériel Futaba CIU-2