Futaba GYC430 Manuel d'utilisateur télécharger pdf

󾛽

WARNING

Failure to follow these safety precautions may result in severe injury

to yourself and others.

󾛹

Check that there is sufﬁcient transmitter battery capacity .

󾛻

Analog servos cannot be used while in "digital servo"

mode.

•Analogservosmaybreakdownif"digitalservo"modeisselected.

󾛻

Do not operate the model and transmitter steering wheel

for about 3-5 seconds after turning on the GYC430 (When

shared with the receiver).

•GYC430initializationandneutralpositionreading.TheGYC430isinitializedwhen

thepoweristurnedon.IntheAVCSmode,theneutralpositionisalsoreadatthe

sametime.Ifinitializationendsnormally,theoperatorisinformedbytworepetitive

movementsoftheservototheleftandright.

󾛹

Always check the direction of operation of the gyro.

󾛻

Do not strike the gyro with a hard object. Do not drop it

onto a concrete surface or other hard ﬂoor.

•Thesensormaybecomedamagedduringstrongimpacts.

󾛻

Do not use trims or mixing in AVCS mode.

•IntheAVCSmodeallcorrectionsaremadebythegyro.Therefore,iftrimmingand

mixing,areturnedon,operationwillbethesameasdeviatingfromtheneutralpo-

sition.

󾛻

Do not use the GYC430 for applications other than RC cars.

•ThisgyroisdesignedforRCcarsonly.Donotuseitforotherapplications.

Connecting the GYC430

Connecting the GYC430 (S.BUS receiver is required)

Mounting to Chassis

ＲＣカー用レートジャイロ

INSTRUCTION MANUAL

Rate Gyro for RC Cars

For RC models

GYC430

Steering

servo

Extension cord:（Black）

Extension cord:（Red）

Port 3

Port 1

Steering CH

Gyro gain CH

Port 2

Receiver

Gyro gain CH(Receiver)←connect→Port2(GYC430)

Remote gain eﬀective. Trimmer(GYC430) becomes LIMIT.

Gyro gain CH(Receiver)←It does not connect→Port2(GYC430)

Remote gain is invalid. Trimmer(GYC430) becomes GAIN.

GYC430

S.BUS Receiver

S.BUS CH

Steering --- 1CH

Gyro gain --- 3CH

The port 2 is not connected.

S.BUS/S.BUS 2 Port

Steering

servo

Extension cord:（Black）

Port 3

Port 1

In S.BUS connection, the port

2 is not connected.

Remote gain is still eﬀective.

Gyro

Included sponge

sensor tape

Degrease

and stick

Horizontal plane

Flat surface of the chassis where the sensor

tape sticks easily. Mount the gyro level so

that it is not tilted relative to the chassis.

Use the a included double-sided sponge tape to rmly attach the gyro perpendicular to the control axis, at a

position where there is as little vibration as possible. Make the wiring loose and bundle it with the included

magic strap so that it will not interfere with the rod.

Gyro mounting position

The direction of rotation xed by the gyro can be

any direction within 360° relative to the steering

axis controlled by the gyro.

• No part of this manual may be reproduced in any form without

prior permission.

• The contents of this manual are subject to change without prior

notice.

• Futaba is not liable for any potential damage (accidental or

otherwise) that may occur after installation.

Before using your new gyro, please read this manual thoroughly

and use the gyro properly and safely. After reading this manual,

store it in a safe place.

● Dedicated RC car setting

Vehicle straightness and cornering performance can be increased without

taking into account the effect of the road surface, etc.

● Remote gain function and mode switching function

You can adjust gain from the transmitter (3 or more CH) by using the

remote gain function. Gain can also be adjusted with the trimmer on the

GYC430. The mode switching function allows AVCS/NORMAL gyro

mode switching.

● Integrated, compact,and light weight

Compact size

（

20.5x20.5x11mm

）

and light weight

（

3.5g

）

realized

by high density mounting technology.

● Easy setup

The GYC430 can be used immediately with minimum setup.

● Supporting the S.BUS/S.BUS2 connection

Only one wire connection to the receiver can operate the GYC430.

GYC430 Ratings:

(Integratedsensortyperategyro)

•Gyrosensor:MEMSvibratingstructuregyro

•Operatingvoltage:DC4.0Vto8.4V

•Currentdrain:30mA(excludingaservo)

•Operatingtemperaturerange:-10ºCto+45ºC

•Dimensions:20.5x20.5x11.0mm(exceptprotrusion)

•Weight:3.5g

•Functions: Sensitivitytrimmer.LED monitor.Servoselection(Digital/

Analog).S.BUS/S.BUS2connection.

Features of GYC430

Functions

Monitor LED display

State Color Move Reference

1. No servo pulse /

sensor error

Red 2 ﬂash

2. Warm-up Green Fast blink

3. Sensor initialization Red/Green ON

AVCS (Red)

NORMAL (Green)

4. Turn Red/Green Fast blink

Right (Green)

Left (Red)

5. Neutral offset Orange Slow blink Stick operation

6. Gain OFF

－

OFF

7. Switch operation Green One blink

Each time of switch

operation

8. Low battery Red One ﬂash Less than 3.8V

● Trimmer

（Limit/Gain）

● LED

● Servo selection switch

(Digital/Analog)

● Port1（Steering input/

S.BUS input）

● Port2（Gain input）

● Port3（Steering servo output）

● Gyro direction

Switch

Set Contents

The following items are supplied with the GYC430:

Mini screwdriver

Sensor tape

Extension cord: (Black)

Extension cord: (Red)

Wiring strap

GYC430

1M23N27502

Thank you for purchasing the GYC430

RC cars gyro. Compact and lightweight,

the GYC430 is designed to RC cars

steering control. If the transmitter has

3 or more channels (capable of 3CH

adjustment) the gyro sensitivity can be

adjusted from the transmitter. Features

include simple set-up and S.BUS/S.BUS2

connectivity.

1 2

Résumé du contenu

Page 1 - ＲＣカー用レートジャイロ

󾛽WARNING Failure to follow these safety precautions may result in severe injury to yourself and others. 󾛹Check that there is sufﬁcient transmitter bat

Page 2 - AVCS NORMAL

AdjustmentsRunning AdjustmentS.BUS SystemAVCS / NORMAL ModesServo movement when the car is stoppedServoLink the servo in accordance with the kit instr

Commentaires sur ces manuels

Pas de commentaire

Futaba GYC430 Manuel d'utilisateur

Naviguer en ligne ou télécharger Manuel d'utilisateur pour Instruments de mesure Futaba GYC430. Futaba GYC430 User Manual Manuel d'utilisatio

Résumé du contenu

Commentaires sur ces manuels