Futaba GY501 Manuel d'utilisateur télécharger pdf (Page 38)

DATA SETTING

Gyro Gain Adjustment

Initial value: 100%

Performs gyro sensitivity adjustment. Two-point gain adjustment is

possible. The setting range is 0 to 100%. When "A: or "N" is

displayed in accordance with operation mode setting, the GY501

operates in the AVC mode and Normal mode, respectively. The gain

display indicates the actual gain, and changes with transmitter

remote gain adjustment.

Gyro Reverse

Initial value: NOR

Sets the direction of operation of the gyro.

Displays the receiver power supply voltage.When the voltage drops

to 3.8V, "LOW BAT" is displayed. In the AVCS mode, "A" is

displayed. When the rudder neutral full reset operation was per-

formed, the "****" mark, which indicates execution, is displayed. In

the AVCS mode, when there is a difference between the transmitter

rudder neutral position and the GY501 neutral data, the " " mark is

displayed.

1 2 ... 33 34 35 36 37 38 39 40 41 42 43 44 45

Pas de commentaire

Futaba GY501 Manuel d'utilisateur Page 38