Futaba 8FGAS, 8FGHS 2.4GHz Manuel d'utilisateur télécharger pdf (Page 51)

Stick calibration method

*J3 and J4 correction is described below. J3 and J4 correction

is performed using the same procedure.

1.Select [CALIBRATION] and access the setup

screen shown below by touching the RTN

button.

2.Move the cursor to the J3-J4 button and

touch the RTN button.

3.Move the J3 or J4 sticks to the neutral position

and press the RTN button for one second.

4.Set the J3 and J4 sticks fully to the bottom

right and wait until the buzzer sounds.

5.Set the J3 and J4 sticks fully to the top left and

wait until the buzzer sounds.

6.The above completes the correction

operation. Operate and check if stick

correction was performed normally.

1 2 ... 46 47 48 49 50 51 52 53 54 55 56 ... 138 139

Pas de commentaire

Futaba 8FGAS, 8FGHS 2.4GHz Manuel d'utilisateur Page 51