Futaba 8FGAS, 8FGHS 2.4GHz Manuel d'utilisateur télécharger pdf (Page 79)

MODEL MENU (COMMON FUNCTIONS)

This section describes the D/R, program mixing,

and other functions common to all model types.

Before setting the model data, use the Model

Type function of the Linkage menu to select the

model type matched to the aircraft. If a different

model type is selected afterwards, the D/R, program

mixing, and other parameters are reset.

If either a helicopter or glider have been selected

as the model type, then the specic functions in the

Model menu can be set for each ight condition. If

you want to switch the settings for each condition

by switch, stick position, etc., use the Condition

Select function to add ight conditions. (Up to ve

conditions can be used)

Note: The T8FG is designed so that the airplane

and glider (including EP glider) model types

are compatible with aircraft of similar type

wings.

This section outlines the relationship between

the functions common to airplanes and

gliders, except some dedicated functions,

and model type.

The setting menus will depend on the number

of servos and other differences according to

the wing type used. The setup screens in the

instruction manual are typical examples.

*The Model menu screen depends on the

model type.

Model Menu functions (Common) list

●SERVO

Servo test and servo position display (For a

description of its functions, see the Linkage Menu

section.)

●CONDITION (applicable to helicopter and

glider selections)

Flight conditions addition, deletion, copy,

condition renaming, and condition delay can be set.

●DUAL RATE

The D/R curve of a T8FG transmitter may be

activated from a switch, stick, position, etc. For

information on how to do so, please refer to the

Switch Setting Method located at the back of this

manual.

●PROG. MIX

The T8FG transmitter allows up to five

completely customizable program mixes.

● Access the model menu shown below by

touching the MDL button twice at the home

screen, etc.

● Select [MODEL MENU]

and return to the home

screen by touching the

RTN button.

<SensorTouch™>

● Select the function you want to set and

access the setup screen by touching the RTN

button.

Scrolling

● Moving cursor

● To next page

1 2 ... 74 75 76 77 78 79 80 81 82 83 84 ... 138 139

Commentaires sur ces manuels

Pas de commentaire

Futaba 8FGAS, 8FGHS 2.4GHz Manuel d'utilisateur Page 79

Commentaires sur ces manuels

Produits connexes et manuels pour Accessoires de communication Futaba 8FGAS, 8FGHS 2.4GHz