Futaba 8FGAS, 8FGHS 2.4GHz Manuel d'utilisateur télécharger pdf (Page 53)

2. With the input next to the desired sensor

highlighted, press the Return (RTN) button one

time.

3. Using the SensorTouch, scroll through the

available models. To select the desired model,

press the Return (RTN) button.

4. Repeat as desired for the remaining sensors.

Using the sensors to select the model:

1. Turn ON the transmitter, activating the Quick

Select screen. If Model (MDL) has been

selected, please be sure to press the Model

(MDL) sensor when powering up the transmitter.

* Please note: Even if the Quick Select function is active, the

Power Mode screen will appear when the transmitter is turned

ON while simultaneously pressing the Return (RTN) button.

2. To select the model assigned to a particular

sensor, double-click the desired sensor. For

example, MODEL- 03 is assigned to S1, double-

click S1 to bring forth all settings, etc. for Model

-03. The T8FGS offers an audible and visual

confirmation as the selected model memory is

changed accordingly.

* If the Return (RTN) button is double-clicked, the T8FGS the

current model is selected as indicated on the display. That is,

the model that was used prior to the last time the transmitter

was turned OFF.

Model Select Screen

This update also allows the Model Select screen to be

accessed immediately upon turning ON the transmitter.

* Please note: this function cannot be utilized at the same time as

the Quick Select function. If more than four models are own

regularly, we suggest that the Model Select function be utilized

as it will save time when selecting the desired aircraft. If four,

or fewer, models are own, the Quick Select option would be the

best choice.

* Please note: the Model Select function does not allow access

to the RENAME, COPY or DELETE options. To utilize one

of these options, please access the Model Select screen in the

typical manner as described in the complete instruction manual.

1.The Start Selection (START SEL.) menu is accessed

through the T8FG’s System Menu. Turn the

transmitter ON and then press the SYS (System)

button two times. Use the SensorTouch™ to

highlight the Start Selection (START SEL.) and

then press the Return (RTN) button to conrm the

selection.

2. The Start Selection (START SEL.) menu option

defaults to OFF meaning that Quick Select

and Model Select are not applicable. To

activate the Quick Select or Model Select, use

the SensorTouch to scroll to the OFF setting as

denoted in the image. With the OFF indication

highlighted, press the Return (RTN) button and

rotate the SensorTouch once again to scroll to

the Model Select (MODEL SEL.). Press the Return

(RTN) button once again to activate Model

Select as indicated.

Model Select Activation:

With the Model Select (MODEL SEL.) option

activated, there are two additional options available

for customization; ALWAYS and MDL (Model).

These options determine if/when the Model Select

information will appear on-screen. ALWAYS, as the

name suggests, indicates that each time the transmitter

is powered-up, the Model Select information will

appear on-screen. The MDL (Model) setting indicates

that the Model Select information will appear on-

screen only when the MDL button is pressed

simultaneously as the transmitter is turned ON.

With the Model Select mode highlighted, use the

SensorTouch to move to the activation setting options.

Model (MDL) is the default setting. Press the Return

(RTN) button to bring forth the options, then scroll

to the ALWAYS setting using the SensorTouch pad.

Press the Return (RTN) button once again to nalize

the selection.

Using the Model Select Function:

1 2 ... 48 49 50 51 52 53 54 55 56 57 58 ... 138 139

Commentaires sur ces manuels

Pas de commentaire

Futaba 8FGAS, 8FGHS 2.4GHz Manuel d'utilisateur Page 53

Commentaires sur ces manuels

Produits connexes et manuels pour Accessoires de communication Futaba 8FGAS, 8FGHS 2.4GHz